SDS bits lock into a rotary hammer with grooves in the shank instead of a chuck, so the bit can slide back and forth while the hammer does the work. There are two main types, and they aren't interchangeable.
How to tell them apart
| SDS Plus | SDS Max | |
|---|---|---|
| Shank diameter | 10mm | 18mm |
| Grooves | 2 open, 2 closed | 3 open, 2 closed |
| Typical hammer | 2 to 4 kg rotary hammers | 5 to 12 kg combi and demolition hammers |
| Best hole range | 4mm to 26mm | 12mm to 40mm+ |
Look at the end of the shank: if it's about the thickness of a pencil, it's SDS Plus. If it's closer to a thumb, it's SDS Max.
When to use SDS Plus
SDS Plus covers most day-to-day work for electricians, plumbers, carpenters and installers: wall plugs, dynabolts, brackets, conduit holes and fixing into brick, block and concrete slabs. The hammers are light enough to use overhead all day.
When to use SDS Max
SDS Max is for bigger holes and heavy reinforced concrete: structural anchors, starter bars, core penetrations for services, and deep holes through thick walls. Our SDS Max bits have a 4-cutter cross-head carbide tip that keeps the hole round and handles rebar better.
Can I use an adaptor?
Adaptors exist, but putting a small SDS Plus bit in a big SDS Max hammer overloads the bit and wears it out fast. Use the bit that matches your hammer.
Points and chisels
The same shank types apply to chisels. SDS Plus chisels are good for chasing and tile removal. SDS Max and 30mm hex chisels are for heavy breaking and demolition.
Shop by shank
- SDS Plus drill bits and SDS Plus chisels
- SDS Max drill bits and SDS Max chisels
- 30mm hex demolition chisels
Not sure which you need? Call 0422 277 636 or read our anchor sizing guide.